TA200 Plus Series
TA200 Plus WiFi DHCP
The WiFi is a mechanism that allows electronic devices to exchange data wirelessly over a computer network. The TA200 Plus has an optional connection function using the Wifi to connect to a network resource via a wireless network access point. The ...
FingerTec 3G Module
The FingerTec 3G module is ready to be used in models with FEM 800, which are TA200Plus (normal 12V model), Q2i and Face ID 2. Refer to the below table for technical specifications of the 3G module. Technical Specifications Frequencies 2G/2.5G – ...
TA200Plus : Introducing WiFi Feature
Introduction You can now customize TA200Plus with WiFi components and install our firmware for WiFi support. WiFi Component 1) WiFi Module 2) WiFi Antenna 3) WiFi Module Holder 4) Instruction of WiFi Module Please provide your terminal information ...
A Simple Tool to Upload User Photos into Devices That Runs on FEM Series Coreboards
The newest version of TCMS V2 and TCMS V3 are compiled with the latest Software Development Kit (SDK) to build an advance adaptation of TA100C and AC100, which are equipped with the new Core Board version known as FMM 100, replacing its older ...
TA 200 Plus Wifi Setup
Introduction FingerTec offers an array of time attendance devices to fulfill the market's requirements. However, on top of the various selection, there are select devices customizable to the client's specific requirements such as adding a Wi-Fi. To ...