TA200 Plus WiFi DHCP

TA200 Plus WiFi DHCP

The WiFi is a mechanism that allows electronic devices to exchange data wirelessly over a computer network. The TA200 Plus has an optional connection function using the Wifi to connect to a network resource via a wireless network access point.

The WiFi option allows for an easier device installation without the needs of wiring and facilitates a faster and stable real time transfer of attendance data.  

The Dynamic Host Configuration Protocol (DHCP) is a network configuration protocol for hosts on Internet Protocol (IP) networks. Terminals that are connected to IP networks must be configured before they can communicate with the software. The most essential information needed is an IP address, and a default route and routing prefix. DHCP eliminates the manual task by a network administrator. It also provides a central database of devices that are connected to the network and eliminates duplicate resource assignments.

If you have a problem setting up the configurations for your TA200 Plus WiFi, we have a solution for you. We have developed a firmware and by using the DHCP, you can effortlessly configure the WiFi settings into your terminal.

We have not released the firmware to public yet but we will email it to you upon request. If you are interested to obtain this tool, please send a request email to support@fingertec.com.

    • Related Articles

    • TA 200 Plus Wifi Setup

      Introduction FingerTec offers an array of time attendance devices to fulfill the market's requirements. However, on top of the various selection, there are select devices customizable to the client's specific requirements such as adding a Wi-Fi. To ...
    • WiFi Configuration Guide For FingerTec TA100C

      Introduction: WiFi is considered as one of the most required technological aspects for a modern lifestyle. As such, there are many WiFi compatible devices offered in the market today that can connect to the Internet. The WiFi option also allows for ...
    • TA200Plus : Introducing WiFi Feature

      Introduction You can now customize TA200Plus with WiFi components and install our firmware for WiFi support. WiFi Component 1) WiFi Module 2) WiFi Antenna 3) WiFi Module Holder 4) Instruction of WiFi Module Please provide your terminal information ...
    • How to Add QF Plus Device in the Existing Ingress Software and TimeTec AWDMS

      IntroductionFor the latest version of AWDMS and Ingress Software (version, you can add QF Plus Device in Ingress Software and AWDMS and this device will capture the transaction log data as attendance in Ingress and AWDMS. Note: Upon purchase ...
    • Connecting the H2i with an AdapTec Plus

      With the recent release of our new product AdapTec Plus, many might wonder what is the role of AdapTec Plus in supporting the terminal. The AdapTec plus is a combination of a power supply with enhanced access control functionalities. It supports ...