Pairing H2i With H2i

Pairing H2i With H2i

Under certain configurations, FingerTec devices can be paired with each other in the same access control environment such as the H2i device. To pair one H2i device with another H2i device, the user needs to modify the setup for the master terminals to use it as master-slave terminals. For instructions on how to modify the setup, click here.

As a gentle reminder, please make sure that:
  • Master reader - AdapTec Plus is turned ON and the Wiegand output is User ID. 
  • Slave reader - AdapTec Plus is turned OFF and the Wiegand output is User ID. 
Please refer to the below wiring diagram for pairing two H2i devices and and AdapTec Plus:

adaptec plus, h2i, access control, fingerprint door locks, biometrics, pairing

    • Related Articles

    • Pairing Q2i with R2c

      Effective immediately, Q2i devices can now be paired with R2c readers. However, this is only possible for Q2i devices with a core board that is version FEM800. When purchasing a brand new Q2i terminal, remember to notify the sales person that the ...

    • Pairing AC900 with R2c

      Effective immediately, AC900 devices can now be paired with R2c readers. However, this is only possible for AC900 devices with a core board that is version FEM565. When purchasing a brand new AC900 terminal, remember to notify the sales person that ...

    • Pairing R3c with Face ID X

      Introduction Master-slave is a model communication or process to controls one or more other devices that serve as their communication hub. One device will act as te Master control and other devices will automatically label as the slave terminal(s). ...

    • Pairing a Thermal Receipt Printer with TA100C FMM

      Introduction Now you can pair a Thermal Receipt Printer with TA100C FMM! A receipt can be printed after every clocking is done at a TA100C terminal. Currently, the thoroughly tested model of a Thermal Receipt Printer that works with TA100C is the ...

    • Pairing a Door Remote Control with AdapTec Plus

      Introduction With AdapTec Plus, you can unlock a door easily by using a remote control. Pair your door remote control with AdapTec Plus to use this feature. Below is the wiring diagram showing you how to do it. Note: If some of the screenshots or ...