Pairing a Door Remote Control with AdapTec Plus

Pairing a Door Remote Control with AdapTec Plus

Introduction
With AdapTec Plus, you can unlock a door easily by using a remote control. Pair your door remote control with AdapTec Plus to use this feature.

Below is the wiring diagram showing you how to do it.

Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.


    • Related Articles

    • AdapTec Plus Siren or AdapTec X Siren Remote Control Door Switch for Mute and Exit Button

      Introduction AdapTec Plus and AdapTec X has a siren function to pair with a master device to enhance the alarm sound signal from a master device. This siren will go off when a master device sends a signal such as a door open, a device broken, etc ...

    • Kadex+ With Adaptec Plus Wiring Diagram

      Welcome to our new lineup of devices, featuring a robust and waterproof design. The Kadex+ is compact yet powerful, with a large capacity to store 200,000 transaction logs and hold up to 50,000 cards. More than just an attendance device, the Kadex+ ...

    • Connecting the H2i with an AdapTec Plus

      With the recent release of our new product AdapTec Plus, many might wonder what is the role of AdapTec Plus in supporting the terminal. The AdapTec plus is a combination of a power supply with enhanced access control functionalities. It supports ...

    • AdapTec Plus and AdapTec-X, What’s Your Preference?

      Convenience VS High-Level Security AdapTec Plus and AdapTec X are designed to support two installation modes; one provides utmost convenience to users and another provides high-level security but slightly compromised in terms of user experience. ...

    • Option to Connect an AC240V Siren with a FingerTec Device

      The siren output signal from a FingerTec device is known as a dry contact and this basically means that the signal is not initially connected to a voltage source. It can also be referred to as a secondary set of contacts of a relay circuit, which ...