Pairing AC900 with R2c

Pairing AC900 with R2c

Effective immediately, AC900 devices can now be paired with R2c readers. However, this is only possible for AC900 devices with a core board that is version FEM565. When purchasing a brand new AC900 terminal, remember to notify the sales person that the terminal is to be paired with R2c as the slave reader.

If you are already using a AC900 device at your place, please check the core board's version  (either FEM500 or FEM565) before pairing it with an R2c reader. You can check this info by using the FingerTec Device Info tool (Click HERE to download).

To Enable AC900 to pair with R2c, Press Menu > Option > Access Option > 485 Reader Fun. > Y or N > Set to Y > Save > Restart both the AC900 and R2c.

For your reference, below is an installation diagram for the AC900 and R2c devices with the new AdapTec Plus.

    • Related Articles

    • Frequently Asked Questions (FAQ): Smart AC Series/FaceID 5 Series with AWDMS/Ingress

      Introduction This article is prepared to explain further on frequently asked question regarding Smart AC and Face ID5 with the AWDMS and Ingress software. 1. Can Ingress work well with these devices? Yes, the Ingress version 4.0.1.x or above supports ...

    • Pairing H2i With H2i

      Under certain configurations, FingerTec devices can be paired with each other in the same access control environment such as the H2i device. To pair one H2i device with another H2i device, the user needs to modify the setup for the master terminals ...

    • Pairing Q2i with R2c

      Effective immediately, Q2i devices can now be paired with R2c readers. However, this is only possible for Q2i devices with a core board that is version FEM800. When purchasing a brand new Q2i terminal, remember to notify the sales person that the ...

    • How To Perform Uploading Photos by Batch To Smart AC Series/FaceID 5 Series

      Introduction To enroll face templates of all staff for a large workforce organization can be challenging. However, AWDMS is now released with an easier approach to facilitate the uploading process of user photos to the device(s) and use as face ...

    • Pairing R3c with Face ID X

      Introduction Master-slave is a model communication or process to controls one or more other devices that serve as their communication hub. One device will act as te Master control and other devices will automatically label as the slave terminal(s). ...