FingerTec Terminal Function Tool: Enabling the DHCP Option at the Terminal
The FingerTec Terminal Function Tool is an essential tool for all technical support personnel. The FingerTec Terminal Function Tool supports all FingerTec models and provides useful time attendance and access control features. We can update the required and compatible functions into the terminal by using this tool.
By connecting to the terminal using TCP/IP connection, it is essential to assign an IP address to the terminal using a LAN connection. It is possible to assign an IP address to the terminal by using the DHCP server. A DHCP Server assigns IP addresses to terminals. This is very often used in enterprise networks to reduce configuration efforts.
To enable the DHCP option at the terminal, please refer to the steps below:
1. Insert the Terminal IP and click Connect.
2. Check the DHCP tick box and click Update.
3. After the update, the click Restart to restart the terminal and complete the update.
4. For black and white screen models, press Menu > Options > Comm Opt > DHCP set as Y.
For multimedia models, you do not need to configure any settings.
You may download the FingerTec Terminal Functions Update Tool here.
By connecting to the terminal using TCP/IP connection, it is essential to assign an IP address to the terminal using a LAN connection. It is possible to assign an IP address to the terminal by using the DHCP server. A DHCP Server assigns IP addresses to terminals. This is very often used in enterprise networks to reduce configuration efforts.
To enable the DHCP option at the terminal, please refer to the steps below:
1. Insert the Terminal IP and click Connect.
2. Check the DHCP tick box and click Update.
3. After the update, the click Restart to restart the terminal and complete the update.
For multimedia models, you do not need to configure any settings.
You may download the FingerTec Terminal Functions Update Tool here.
Related Articles
Update for FingerTec Terminal Function Tool
Introduction FingerTec terminal function varies according to the models. However, not all of the functions are preloaded into the terminal in order for the terminal to run smoothly, without having unnecessary functions in it. However, you can load ...TA200 Plus WiFi DHCP
The WiFi is a mechanism that allows electronic devices to exchange data wirelessly over a computer network. The TA200 Plus has an optional connection function using the Wifi to connect to a network resource via a wireless network access point. The ...How To Use The FingerTec Device Info Tool
The FingerTec Device Info tool is designed to link up your FingerTec devices for reading its vital information. This information is important for the support team to know before best assisting you. Read more for the download link and instructions on ...Keeping Track of Your FingerTec Terminal's Transaction Memory Capacity
All the FingerTec terminals are equipped with a flash memory to store transaction data, fingerprint templates, face templates, etc. The flash memory is a permanent (non-volatile) storage and it can store data even without the power supply. The ...Fire Alarm System Integration with FingerTec Terminal Wiring Diagram
Introduction Exit routes for emergencies are important for every building when there are fires or other incidents. Regarding fire safety, most buildings have a fire alarm system as part of a full security system. With a Fire Alarm System, doors with ...