Wiring Installation for Face Id X & Face Id 2 (In/Out) Without Using Adaptec Plus

Wiring Installation for Face Id X & Face Id 2 (In/Out) Without Using Adaptec Plus

INTRODUCTION 

The combination of Face ID X and Face ID 2 can be used together without Adaptec Plus. There are differences in wiring configuration if clients use Adaptec Plus as the power supply and door access controller, compared to using only Face ID X/2 devices. The wiring diagram has been simplified to make installation and configuration easier. 

 

REQUIREMENT 

  • 2 Units of Face ID X / Face ID 2 device 

  • EM Lock  

  • Emergency break glass (optional) 

  • Key Switch (optional) 

  • Exit button (if not using an out/slave reader) 

 


INSTALLATION DIAGRAM 

 

 

WIRING DIAGRAM 


    • Related Articles

    • Set Permanent Door Open in Face ID 2 FMM

      Introduction Permanent door open is a type of door operation whereby the door will stay open and anybody can access it without verification. Usually this feature is applicable to  premises that need to accept many non-staff into their space such as ...
    • Installation Guide of Face ID 4d (FMM) With AdapTec Plus

      Introduction FingerTec Face ID 4D is now supplied with a new version of the coreboard (FMM) that comes with new hardware parts and new exterior parts. To ensure the reader connects with secured wiring, we suggest using the AdapTec Plus connection. ...
    • FACE ID 2 IN/OUT Wiring Diagram Using AdapTec Plus

      By using 2 units of Face ID 2, users can now control door access on top of checking time attendance. We will be demonstrating how to connect 2 units of the Face ID 2 terminals to work as IN/OUT terminals. You will need to connect the 2 terminals ...
    • AdapTec Plus and AdapTec-X, What’s Your Preference?

      Convenience VS High-Level Security AdapTec Plus and AdapTec X are designed to support two installation modes; one provides utmost convenience to users and another provides high-level security but slightly compromised in terms of user experience. ...
    • AdapTec Plus Siren or AdapTec X Siren Remote Control Door Switch for Mute and Exit Button

      Introduction AdapTec Plus and AdapTec X has a siren function to pair with a master device to enhance the alarm sound signal from a master device. This siren will go off when a master device sends a signal such as a door open, a device broken, etc ...