Set Permanent Door Open in Face ID 2 FMM
Introduction
Permanent door open is a type of door operation whereby the door will stay open and anybody can access it without verification. Usually this feature is applicable to premises that need to accept many non-staff into their space such as shops, building receptions, and banks. With this option, the door will stay open for your visitors’ convenience but the staff can still verify their daily work attendance without any problems.
Operation
Here are some examples for shop operations that can use permanent door open feature.
1. The shop opens at 9.00 am, hence the staff will start to arrive starting at 8.30 am
i) Verification needs to open the door before 9.00 am
ii) Attendance will be recorded.
2. The door will operate with Permanent Door Open feature during work hour from 9.00 am to 5.30 pm.
i) The door will stay open during this period
ii) Verification of staff’s attendance will work as normal
Wiring configuration
The wiring for the device is still the same, which is using NC COM connection directly to the device. If you are using our Adaptec Plus or Adaptec-X please use this convenient installation. This is not applicable on Weigand connection.
Option Settings
There are some settings you need to do on the device. Please refer below for further information.
Menu > Access Control
2. Set the Time Zone. To set the duration time lock to open.
3. Time Zone option view
4. Faceid 2 FMM has 50 different time zones that can be used to control a premise’s user access. For Permanent Door Open function, we strongly recommend you to use Time Zone number 50 to avoid mix up with other Time Zones.
5. Set the duration time for lock to open on Time Zone 50.
Refer to the diagram below, the time for permanent door open feature will operate from 9:00 am to 5:30 pm every day. Except for Sundays when the shop is closed, so the permanent door open feature will not operate.
6. Press Back and go to Access Control Option
7. Go to “NO Time Zone” and select Time Zone 50.
Now, it’s all set! But, don’t forget to check that everything works properly.
Related Articles
How to Install Two Face ID2 or Face IDX Door Access Devices with Door Force Open ID Verification Siren Clear
Introduction FingerTec Face ID2 and Face IDX are contactless biometrics face recognition door access devices. Typically, for those using fingerprint devices or card devices for exits, these devices are paired with slave units such as FingerTec R2c or ...How to Install Two Face ID2 or Face IDX Door Access Devices with Door Force Open ID Verification Siren Clear
Introduction FingerTec Face ID2 and Face IDX are contactless biometrics face recognition door access devices. Typically, for those using fingerprint devices or card devices for exits, these devices are paired with slave units such as FingerTec R2c or ...The New Face ID 2 FMM 220 - 8 Possible Mishaps & the Quick Fixes
Introduction The new Face ID 2 has recently been updated to FMM 220 firmware. With it’s improved, up-to-date and much-friendlier user interface, Face ID 2 offers a few new and enhanced features that will definitely benefit its users. However, this ...New Face ID 4 (FMM) - Improving Face Recognition Process
Introduction The new version of Face ID 4 has been installed with a new version of coreboard (FMM). Some of the options or settings are different from the previous version. In this version, we have improved the registration process for face ...Firmware Update for Q2i (FEM800) - Permanent Door Open Enhancement
Introduction: FingerTec has updated Q2i FEM800 firmware which now includes an enhancement on Permanent Door Open feature to provide more flexibility in terms of scheduling door opening. Benefits: Permanent Door Open Close Time Zone feature in Ingress ...