FACE ID 2 IN/OUT Wiring Diagram Using AdapTec Plus

By using 2 units of Face ID 2, users can now control door access on top of checking time attendance. We will be demonstrating how to connect 2 units of the Face ID 2 terminals to work as IN/OUT terminals. You will need to connect the 2 terminals together according to the diagram below:

With the above wiring, you can now have access to enter and also exit from the same door using the 2 units of Face ID 2. Voila!

• Related Articles

• Installation Guide of Face ID 4d (FMM) With AdapTec Plus

  Introduction FingerTec Face ID 4D is now supplied with a new version of the coreboard (FMM) that comes with new hardware parts and new exterior parts. To ensure the reader connects with secured wiring, we suggest using the AdapTec Plus connection. ...

• FACE ID 6 Wiring for Access Control

  Introduction Face ID 6 is the latest addition to the access control devices, which boasts multiple verification methods including face recognition, card, password and palm verification. This article will guide you on the installation of the Face ID 6 ...

• Face ID 5 External Alarm Wiring Diagram

  Introduction The Face ID 5 series are equipped with an alarm function to notify the user of any restrictions on entry or security measures such as a door or device being forced open, high body temperatures (Face ID 5 TD /FTD), denying unknown access, ...

• AdapTec Plus and AdapTec-X, What’s Your Preference?

  Convenience VS High-Level Security AdapTec Plus and AdapTec X are designed to support two installation modes; one provides utmost convenience to users and another provides high-level security but slightly compromised in terms of user experience. ...

• FACE ID 5 TD / FTD Wiring for Access Control

  Introduction Good news, FingerTec has launched Face ID 5 recently, and the two new models that are equipped with temperature readers are Face ID 5 TD and Face ID 5 FTD that also can be used for building access control. *Please state in your inquiries ...