R2 (565) – R2 (565) Master - Slave Wiring Diagram & Settings

Previously we have discussed on how to modify the setup for 2 master terminals to use it as master-slave terminals. You can read the full article here. Today we will be demonstrating how to connect the 2 units of R2 (565) terminals to work as master-slave terminals. To use 2 units of R2 as master-slave terminal, you will need to connect the 2 terminals together according to the connection diagram below: Terminal configurations:

At R2 (565) Master

• Press Menu > Option > System Option > Wiegand > Input setting > FP device > input format = WG26 with ID > Esc > Input = User > Esc & Save

At R2 (565) Slave

• Press Menu > Option > System Option > Wiegand > Output setting > Output format = WG26 with ID > Esc > Output = User > Esc & Save
• Press Menu > Option > Comm Option > Adaptec Plus = N > Esc & Save

Note: If the Wiegand option does not appear, please confirm that your R2 terminal is FEM 565 and not FEM 500. If the Wiegand Option is still not appearing, please check the settings at Menu > Option > Access Option > 485 Reader Function = N > Esc & Save > Restart Terminal, or contact support@fingertec.com for further assistance.

• Related Articles

• R3 - R3 Master -Slave Anti-Passback 2 Doors Wiring Diagram & Setting

  Introduction Some companies look for full control of their own premises. Requirements such as having just one way in and out with two doors to control the access movement within the building. This can be done by setting in our R3 device using the ...

• Installation Wiring Diagram and Settings for R3 and R2c

  Introduction With the new release of our latest products, some terminal installations are different from our previous guides and diagrams. Below is the full installation wiring diagram and settings to connect R3 with R2c. Benefits By pairing R3 with ...

• Face ID 5 – Face ID 5 Master – Slave Connection with Anti-Passback Setup

  Introduction In previous technical tips, we have guided you on how to set it up and we also provide a wiring diagram for the Face ID 5 – Face ID 5 (master-master) connection. Now, we show you how to set up Face ID 5 – Face ID 5 (master–slave) ...

• How to Configure Master-Slave Setup between Face ID 2 FMM220 and R2c

  Introduction This post is intended to those who may face problem in setting up Face ID 2 FMM220 with R2c combination. Wiring installation Settings in Face ID 2 FMM220 Other than the proper wiring setup, there is a setting to configure in Face ID 2 ...

• Ingressus IV with R2c Door Access Separated Power Supply for Each Door Wiring Diagram

  The FingerTec Ingressus IV door access provides a computerised central control access control system to secure the environment. Ingressus can store fingerprints, password and card ID of every user. It justifies accessibilities of every user according ...