How to Connect and Add Push Type Device (Face ID5, Face ID6, Kadex+ and etc.) to TCMSv3 Software
We are excited to introduce the new version of TCMS V3 v4.0.2.6, now
equipped with a MySQL database and middleware that enable connectivity with
Face ID5, Face ID6, Kadex+, etc.
1) If you use a LAN connection,
configure the IP Address, Subnet Mask, and Gateway on your device. Go to Menu
> COMM. > Ethernet. If you are using Wi-Fi, connect the device to the
network accordingly.
Note: The Server Address is your computer's
IP address where Ingress and AWDMS are installed. You can check it using
Command Prompt by typing ‘ipconfig’.
2) Configure the Server Address
and Server Port on your device. Go to Menu > COMM. > Cloud Server
Setting
Note: The Server Address is your computer's
IP address where TCMSv3 is installed. You can check it using Command Prompt by
typing ‘ipconfig’. The Server Port is the default port, which is 8080.
3) Go to device Menu > System
> Device Type Settings > Device Type > set to T&A PUSH.
4) Add the device in Ingress. Go
to Devices > Add Device > Fill in the Device Name, Serial No., Device ID,
and Device Timezone and choose the Communication Mode as Middleware > Add.
Related Articles
How to Add Face ID 5, Face ID 6, and Kadex+ to the New TCMS V3 Software for Time Attendance (ATT) Device Type
Introduction The latest TCMS V3 software now directly supports Face ID 5, Face ID 6, and Kadex+ devices, eliminating the need for the separate AWDMS software. However, please note that this version is ONLY supported for ATTENDANCE purposes. Before ...How To Add Face Id 5/Face Id 6 Device (Time Attendance - T&A Push) In Ingress And AWDMS Software
INTRODUCTION Face ID 5 & 6 series is the all-new face and palm verification terminal equipped with the latest facial recognition technology, an all-rounded upgrade that results in greater performance and reliability. These models have 2 device type ...How to Add New Device (Smart AC1 Series / Face ID 5 Series / Kadex+) in existing Ingress Software and TimeTec AWDMS
Introduction Adding new Smart AC1, Smart AC1/TD, Smart AC1/FTD, Face ID 5, Face ID 5/TD, or Face ID 5/FTD in existing TimeTec AWDMS and Ingress software might lead to problems of synchronizing user data from software to the new device. This is due to ...How to Add New Device (Smart AC1 Series / Face ID 5 Series) in existing Ingress Software and TimeTec AWDMS
Introduction Adding new Smart AC1, Smart AC1/TD, Smart AC1/FTD, Face ID 5, Face ID 5/TD, or Face ID 5/FTD in existing TimeTec AWDMS and Ingress software might lead to problems of synchronizing user data from software to the new device. This is due to ...How to Connect Smart AC1 Series & Face ID 5 Series to AWDMS & Ingress Software
Introduction TimeTec new models such as Smart AC1/TD and Face ID 5/TD carry new firmware and architecture that need a new SDK set to make sure seamless integration of hardware and software. Therefore, TimeTec introduces AWDMS as the middleware ...