Activating the Close and Reverse State in Ingressus
Introduction
This feature that we are about to introduce is called “Close and Reverse State” which is used to lock the door once the door sensor detects that it has been closed. This feature will override the “Lock Open Duration” which has been pre-configured for a door.
How to Activate the Ingressus Close and Reverse State
To use this feature, you will simply need to use a door sensor that is linked up with Ingressus. To configure this feature in Ingress software, simply go to Doors > Select Door Name > Edit > Tick at
“Close and Reverse State”
Sometimes, the security of an office can be easily compromised if the door is not locked once it is closed. This situation can lead to unauthorized access and break-ins. However, the FingerTec’s Ingressus controller has a feature that can overcome this issue.
*Please note that this feature is only available for Ingressus controller.
Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.
Related Articles
Activating the Door Closure Delay Siren in Ingressus
Introduction Security is an important aspect in every organization nowadays. Improper security measures may cause bigger problems such as robbery, data theft or even endanger the safety of a person. Even with the proper access control products ...How to Setup Interlocking in Ingressus
Introduction For higher-level security, interlocking is the fundamental parts of door access security where two doors are interconnecting, where each of the doors must entirely close before one could access another door. This feature is to prevent ...How To Configure Ingressus For Fire Alarm System
Introduction: FingerTec Ingressus I,II and IV devices have the capability to support all doors in opening and closing them when the alarm is triggered in case of an emergency such as a fire. Basically, Ingressus has an auxiliary input that can be ...How The Long Range Reader Works With Ingressus Controller
Introduction On Vehicle Access Control: Vehicle Access Control System is a security control method that can be utilized to allow the access of transportation vehicles such as cars into a compound. In access control systems, users are required to ...Ingressus Metal Casing Setup
Introduction Ingressus controllers are designed to control access for a one-door (Ingressus I), two-door (Ingressus II) and four-door environment (Ingressus IV). With Ingressus, a user needs to verify his identity at a Wiegand terminal or an RS485 ...