“Replace with Latest Clocking” Feature in Ingress & TCMS V3

“Replace with Latest Clocking” Feature in Ingress & TCMS V3

Introduction
Under certain circumstances, some employees need to return to the office after they’ve clocked out to complete some tasks. How do employer deal with this situation in Ingress & TCMS V3?

Ingress & TCMS V3 can capture the last recorded time in the terminal instead of taking the first clock out time. This applies when you are using Weekly or Daily schedule.

Note:
Please be informed that the below configurations are done on Ingress software, as shown in the accompanying images. However, this can also be applied in TCMSV3 to achieve comparable results, as the configuration is similar with only a slight difference in the interface.

To set this, go to Attendance > Clocking Schedule > Range > Edit. You will find “Replace with latest clocking” option below the Range table. The boxes are available at every range column and you can determine your own sets of attendance rules. However, it is highly recommended that you only check this for Out and Done column only.



For example: The OUT time defined in the clocking schedule is 6:00pm and during the interval an employee checked out a few times at 6:15pm, 6:20pm and 6:50pm. If you have checked the box under the “Replace with latest clocking” for Out column, Ingress will select 6:50pm as the OUT record, leaving nothing missing in translation.




Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.


    • Related Articles

    • Use of Clocking Range in Ingress & TCMS V3

      The clocking range (only applicable for Weekly and Daily schedules) is used to determine the maximum time that one slot can record before it is considered as the time for the corresponding slot. For example, value for IN is 08:00 and the value for ...

    • Replacing the Latest Clocking Option Under the Range Tab

      When you click this checker, the TCMS V2 software will replace the transaction data at the Attendance Sheet with the latest downloaded data. For example, a company’s starting work hour is 09:00. The employee comes in to work at 08:30 and verified his ...

    • How To Configure Rounding Feature In TCMS V3 And Ingress Software

      Introduction:  Rounding is a feature in FingerTec TCMS V3 and Ingress software, whereby users can determine the clocking time and attendance record within the Clocking Schedule to be rounded into the nearest minutes as specified in the field (based ...

    • Ingress & TCMS V3 - Setting Up Flexi Schedule with 1 Pair Clocking Setup

      Introduction In some cases, the management can set up Flexi schedule to capture 1 -pair of record (in and out only) under Ingress & TCMS V3 software, so the system only captures the first in and last out. However what happens if the employee ...

    • Overnight Flexi Hour Clocking Schedule in Ingress & TCMS V3

      Introduction Flexi Clocking Schedule is a working schedule that does not include any late-ins, early outs or overtime. This is suitable for groups of workers where their working time is not fixed. Benefit The use of flexible working schedule ...