Ingress & TCMS V3 - Allows Retrieval of Specific Records from Selected FingerTec Devices
Introduction
In Ingress and TCMS V3 software, under Clocking Schedule, there is a feature termed “Enable Attendance Records from Selected Devices only”. This feature will allow you to retrieve attendance logs from a specific device for a specific clocking slot.
The configuration below is done on Ingress software, as shown in the accompanying image but similar steps can be applied in TCMS V3.
Go to Attendance > Clocking Schedule > Select a Schedule > Click Clocking Range.
On the Attendance tab under the Clocking Range, you can see the “Enable Attendance records from selected device only” option at the bottom of every time slot. Select the specific terminal that you want to capture records to treat as attendance for the particular time slot.
Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.
Related Articles
Changing Employee ID in TCMS V2 and FingerTec devices
Introduction There are cases where you need to change the IDs of your employees. For example, an employee that changes department, an employee who is transferred to other branch or an employee who gets promoted. TCMS V2 allows you to change the ...Top 5 Reasons to Switch from TCMS V2 to Ingress
When I first got married, there was only one meagre set of cutleries in my kitchen cabinet. It had a single butter knife, and I didn't really mind having to use it to both spread butter on my roll AND cut my steak, even though it was only excellent ...Importing FingerTec Data from Webster to Ingress / TCMS V3 Explained
Introduction: Webster acts as a platform that allows user to access raw time attendance data from FingerTec hardware either installed locally or remotely. Additionally, this process also allows you to connect the data to your third-party application ...Integrate ZKTeco hardware to FingerTec Software (TCMS V3 or Ingress)
Introduction The capacity for two systems to work together without having to be altered, determine the matching of operating systems. It is common to come across compatibility issues due to a difference between the versions and/or different companies ...How to Enable Attendance Record from Selected Device in TCMS V3 and Ingress
Introduction When dealing with many devices such as Time Attendance and Door Access, TCMS V3/ Ingress software will record every clocking activity of the staff involved. But certain companies want the system to capture the clocking time for ...