Ingress: Reboot Terminals After Making Changes to Device & Door Settings
Some users has gone through scenarios whereby the changes that they have made in Ingress are not updated into the relevant terminals. This is because the terminals need to be rebooted when a user performs any changes to the settings. Even though the Ingress software will prompt users to sync the software each time changes are made via a small pop-up window on the bottom left corner of the screen (Click to sync all device info window as seen in the picture below), users still need to reboot the terminals for the settings to be properly reflected.
The reason why the update did not take effect immediately is because the terminal will only recognize the original settings while the new settings has not been reflected into the terminals. Thus, the terminals need to be rebooted in order for the settings to take effect. This can be done in three ways:
The reason why the update did not take effect immediately is because the terminal will only recognize the original settings while the new settings has not been reflected into the terminals. Thus, the terminals need to be rebooted in order for the settings to take effect. This can be done in three ways:
- Turn the terminals' power off and back on,
- Press the reset button at the terminal,
- Reboot remotely via Ingress by clicking on Devices > Select the devices involved > Other > Reboot Device. Voila!
Related Articles
The Flexibility Ingress Gives Your Doors (Ingress Permanent Door Open Close Feature)
Introduction Ingress, as an access control management application is not only a control panel for door monitoring, but also an easy to use remote control for doors. The remote unlocking, and access level management are two features that makes Ingress ...Use of Clocking settings in Ingress
FingerTec’s Ingress is an integrated access control management application that runs on the familiar MS Windows operating environment. The software is a complete solution for centralizing, managing, and monitoring door activity in FingerTec access ...Ingress - Multiple Device Operation With One Click : Manage Many Devices Remotely Hassle Free
Introduction FingerTec has released the latest update of Ingress (version 3.0.6) which includes 22 enhancements and 7 bug fixes. One of the new features added in the release was the option to manage multiple device operation simultaneously. This ...Device Connection Notification in Ingress
Introduction Meet our latest feature within the Event Alarm setting where you can receive notification regarding the device connection. Through this feature, the administrators will be notified when any of the devices lost connection and re-connected ...Firmware Update for Q2i (FEM800) - Permanent Door Open Enhancement
Introduction: FingerTec has updated Q2i FEM800 firmware which now includes an enhancement on Permanent Door Open feature to provide more flexibility in terms of scheduling door opening. Benefits: Permanent Door Open Close Time Zone feature in Ingress ...