FingerTec Access Control with an Automatic Sliding door
The automatic sliding door can be opened by activating control methods such as motion detectors, push buttons, key switches and access control readers.
There are three types of input that can be used by the automatic sliding door controller/motor if you want to implement access control as the activating control method. Read more to see the three inputs.
Dry Contact
A relay signal from FingerTec’s access control models to open the sliding door.
Wet Contact
A DC output from FingerTec’s access control models to open the sliding door.
Weigand Input
FingerTec models that support the above inputs for the automatic sliding door are:
- Kadex
- m-Kadex
- R2
- AC900
- Q2i
- Face ID 2
- Face ID 3
Related Articles
How to use FingerTec Electric Door Strike
Introduction FingerTec offers two types of electric door strike: 210MF or 210M Door Strike that can be used with our access control devices. Electric door strike replaces the fixed strike face-plate which is often used with a latch-bar (also known as ...3 Access Control Connections Using BoTEMP-X and BoTEMP-Y
Introduction A body temperature reading of people entering buildings and premises is a standard SOP in this pandemic era. It has become a new norm for us globally in combating Covid-19 spread. FingerTec offers temperature reading devices such as ...Verification Fail Alarm in FingerTec Access Control Devices
FingerTec’s access control devices are equipped with a Verification Fail alarm feature. The Verification Fail alarm will trigger the device’s alarm (internal or external alarm) if a user failed to verify for a pre-determined number of times. This ...TC20 Door Access Wiring Diagram
Introduction TC 20 New lineup device for TimeTec HR solution that can cater to attendance records and access control needs for any organisation. It's been equipped with facial recognition, touch-less attendance record and access equipment that fits ...AdapTec Plus Siren or AdapTec X Siren Remote Control Door Switch for Mute and Exit Button
Introduction AdapTec Plus and AdapTec X has a siren function to pair with a master device to enhance the alarm sound signal from a master device. This siren will go off when a master device sends a signal such as a door open, a device broken, etc ...