R2
Setting the New R2 (FEM565) with R2i/R2c
FingerTec has developed a new FEM565 core board and shipped it with the new batch of R2 terminals. The new FEM565 coreboard is faster, more powerful, and has several added advantages as compared to the previous FEM500 coreboard. The improved R2 is ...
R2 (565) – R2 (565) Master - Slave Wiring Diagram & Settings
Previously we have discussed on how to modify the setup for 2 master terminals to use it as master-slave terminals. You can read the full article here. Today we will be demonstrating how to connect the 2 units of R2 (565) terminals to work as ...
Steps to rectify Terminals turning ON and OFF on its own (for AC900, Kadex and R2)
Introduction Due to the wear and tear of terminal parts, some of the terminals will automatically turn ON and OFF on its own at times without any command given. Below are the steps that you can take to rectify this issue on your own. Sleep and ...
Work Code Setup for FingerTec Devices
Introduction Work codes provide a convenient way for companies to categorize different types of work status for their staff, such as attending a meeting or visiting a site. Before work codes can be used, they must be set up in the software and ...
Access Combo and Anti Passback Settings for R2 & R2c
Introduction Access Combo is an access control function that requires verifications to be done by a combination of different users. This function is suitable for highly-secured rooms or vaults that need more than senior-level employees from different ...