KADEX Series
FingerTec Access Control with an Automatic Sliding door
The automatic sliding door can be opened by activating control methods such as motion detectors, push buttons, key switches and access control readers. There are three types of input that can be used by the automatic sliding door controller/motor if ...
Verification Fail Alarm in FingerTec Access Control Devices
FingerTec’s access control devices are equipped with a Verification Fail alarm feature. The Verification Fail alarm will trigger the device’s alarm (internal or external alarm) if a user failed to verify for a pre-determined number of times. This ...
FingerTec Kadex - i-Kadex Firmware Enhancements
Introduction FingerTec Kadex is an Access Control and Time Attendance smart card reader. This terminal allows password and card verification in both single and combination mode including Card only, Password only, Card/Password, and Card & Password ...
How to Customize Kadex RFID To Kadex Mifare
Introduction FingerTec Kadex is an access control device that supports RFID, Mifare, or HID cards. Unfortunately, only one card type is applicable at a specific Kadex. Therefore, if you have a Kadex RFID, you can't use the same device to verify ...
Kadex External Siren
Introduction FingerTec’s Kadex terminal can be customised to support an external siren which is useful in alerting employees to make sure doors close properly after opening them to enter the premise or office. An external siren is also triggered when ...