Work Code Setup for FingerTec Devices
Introduction
Work codes provide a convenient way for companies to categorize different types of work status for their staff, such as attending a meeting or visiting a site. Before work codes can be used, they must be set up in the software and enabled at the device. This article will guide you through the process of setting up work codes from FingerTec software.
Set up at Software (Ingress/TCMS V3)
At Ingress/TCMS V3 software, go to ‘Attendance’ > select ‘Work Code’ > click ‘Edit’
Next, click ‘Add’ > input ‘Work Code’ and ‘Description’ > press ‘Ok’ > and then click ‘Save’
Once you have saved the work code, click ‘Upload’ to upload the work code into the FingerTec R2 device
Enable Work Code Option at the Device (R2)
After you have set the work code in the software, you must enable the work code option at the reader to complete the process. Go to ‘MENU’ > Select ‘Options’ > Click ‘System Options’ > Choose ‘Advanced Option’ > select ‘Work Code’ to enable. The Admin must choose Mode 1 or 2 for the work code to work.
Mode 1:
Place your finger on the scanner > insert the work code > press ‘OK’. The system will then verify the user and save the attendance record with the work code.
Place your finger on the scanner > insert the work code > press ‘OK’. The system will then verify the user and save the attendance record with the work code.
Mode 2:
Press the ‘Arrow Down’ button on the R2 Device > insert your ‘Work Code’ > press ‘OK’ > place your finger to verify. System will then verify and save your attendance with the work code.
Press the ‘Arrow Down’ button on the R2 Device > insert your ‘Work Code’ > press ‘OK’ > place your finger to verify. System will then verify and save your attendance with the work code.
The Result
At the software (Ingress/TCMS V3) you will see the work code have been recorded at Attendance > Data Audit List
Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.
Related Articles
Doorbell Wiring for FingerTec Devices
A doorbell is a small essential device that has become an integral part of our homes and business premises. It serves as a convenient and effective means of alerting occupants to the presence of visitors or deliveries at the front door. Gone are the ...Wiring Guide To Setup TimeTec BLE-2 With FingerTec Controller
Introduction Introducing TimeTec latest product: TimeTec BLE-2 Smart Door Controller which is a new technology for access door controller that brings convenience in unlocking doors as well as enhancing security. TimeTec BLE-2 uses Bluetooth Low ...Workcode Setup for TA500 Device
Introduction Work codes are designed to streamline and enhance your workforce management experience. Our work code system is your solution to ensure accurate and hassle-free attendance monitoring for your workforce. With work codes, you can monitor ...Fingertec TCMSv2 Installation Guide
Introduction TCMSv2 is a Windows-based software to manage the attendance data and generating the report to ease the human resource's work. Process 1) Download the TCMSv2 installer from this link: ...Connecting FingerTec Devices to Shutter Doors
Introduction Some offices or factories use shutters for the front door or loading bay access. By incorporating FingerTec devices, only registered people will have access to the shutters using face verification, fingerprint, card access or password. ...