Steps to Download Temperature Data from Smart AC1/TD or Face ID 5/TD in Ingress Software and Generate Health Screening Reports
Introduction
The Health Screening report is based on the data in the Health Screening under the Monitoring module. These data will be automatically downloaded if the Real-time Monitoring function is turned on. However, you may also download the data from the device through this section before you proceed to generate the report.
Process
1. Go to Monitoring Module > Health Screen > click Download > select the device and date range > click OK. The message will prompt after the download process completes and the available temperature and mask data will be listed in this Health Screening.
1. Go to Monitoring Module > Health Screen > click Download > select the device and date range > click OK. The message will prompt after the download process completes and the available temperature and mask data will be listed in this Health Screening.
Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@fingertec.com, we will update it as soon as possible.
Related Articles
Steps to Change Username on Smart AC1 Series / Face ID 5 Series via Ingress Software
Introduction The Smart AC 1 series and the Face ID 5 series are connected to Ingress software via AWDMS. Since these new models are using middleware AWDMS, the process of changing username via Ingress software is different and needs to be done ...How to Download Missing Personnel Information (Fingerprint/Palm/Face) from Device (Smart AC/ Face ID5) into Awdms & Ingress Software
Introduction The Smart AC1 and Face ID 5 series are the new facial recognition devices with multiple verification mode options such as Fingerprint/Palm/Face/Card/Password. These new devices require connection to the AWDMS before it can be connected ...How to Add New Device (Smart AC1 Series / Face ID 5 Series) in existing Ingress Software and TimeTec AWDMS
Introduction Adding new Smart AC1, Smart AC1/TD, Smart AC1/FTD, Face ID 5, Face ID 5/TD, or Face ID 5/FTD in existing TimeTec AWDMS and Ingress software might lead to problems of synchronizing user data from software to the new device. This is due to ...How to Add New Device (Smart AC1 Series / Face ID 5 Series) in existing Ingress Software and TimeTec AWDMS
Introduction Adding new Smart AC1, Smart AC1/TD, Smart AC1/FTD, Face ID 5, Face ID 5/TD, or Face ID 5/FTD in existing TimeTec AWDMS and Ingress software might lead to problems of synchronizing user data from software to the new device. This is due to ...How to Connect Smart AC1 Series & Face ID 5 Series to AWDMS & Ingress Software
Introduction TimeTec new models such as Smart AC1/TD and Face ID 5/TD carry new firmware and architecture that need a new SDK set to make sure seamless integration of hardware and software. Therefore, TimeTec introduces AWDMS as the middleware ...