Keylock 7700 – Interchange of Double and Single Latch
When interchanging Keylock 7700 between double and single latches, these are the items that you must first have:
Models | Keylock 7700 D (double latch) | Keylock 7700 S (single latch) |
Latch front panel |  | Not applicable |
Door frame panel |  |  |
Keyhole blocker |  |  |
The next vital item is the back plate for the front panel. Keylock 7700D and 7700S both uses different back plates due to their different latches.
Voila! Simply interchange between these parts and you're ready to go.
Related Articles
Keylock 7700 – Interchangeable Lock Tongue
While designing FingerTec's Keylock 7700, we have taken into consideration not only the position of the lock (for left-handed or right-handed users) but also the installation of the door (either swing-in or swing-out method). FingerTec’s Keylock 7700 ...Changing the Keylock 7700 Position
Introduction Here are some tips on how you change the position of your Keylock 7700 either from left to the right or right to the left). Step 1: Change the handle position for the front side. Step 2: Change the handle position for back side. Step 3: ...Weekly-Schedule Configuration for Double Break Time in Ingress or TCMSV3
Introduction There are many companies that practice double break time and some of their administrators are not familiar on how to configure this schedule in Ingress or TCMSv3. So in this tips, we will provide you the steps that are required to ...Weekly-Schedule Configuration for Double Break Time in Ingress or TCMSV3
Introduction There are many companies that practice double break time and some of their administrators are not familiar on how to configure this schedule in Ingress or TCMSv3. So in this tips, we will provide you the steps that are required to ...OFIS Scanner for Fingerprint Template Registration and Time Attendance Device for Clocking Verification (OFIS TA) in TCMS v3/Ingress
Introduction With OFIS scanner, users can perform fingerprint template registration in TCMS v3 / Ingress or use the OFIS scanner as a Time Attendance Device for verification (OFIS TA). The following will explain the steps and procedure to either use ...