Kadex External Siren
Introduction
FingerTec’s Kadex terminal can be customised to support an external siren which is useful in alerting employees to make sure doors close properly after opening them to enter the premise or office. An external siren is also triggered when someone tried to force open the door without verifying the kadex terminal and if someone dismantles the Kadex device from where it’s installed.
Requirement
- Adaptec Plus
- Kadex Reader
- External Siren 12VDC
- Siren Mute Button/Switch
Wiring Diagram
FingerTec’s Kadex terminal can be customised to support an external siren which is useful in alerting employees to make sure doors close properly after opening them to enter the premise or office. An external siren is also triggered when someone tried to force open the door without verifying the kadex terminal and if someone dismantles the Kadex device from where it’s installed.
Requirement
- Adaptec Plus
- Kadex Reader
- External Siren 12VDC
- Siren Mute Button/Switch
Wiring Diagram
Go to Menu – options – Access Options
Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.
Related Articles
Option to Connect an AC240V Siren with a FingerTec Device
The siren output signal from a FingerTec device is known as a dry contact and this basically means that the signal is not initially connected to a voltage source. It can also be referred to as a secondary set of contacts of a relay circuit, which ...Setting up Face ID 4D External Siren (FMM220) (Siren 240VAC)
Introduction In the previous article, we have provided instructions and a wiring diagram for a 12VDC external siren. Some work environments have large spaces such as industrial industries, factories and construction sites. We recommend users install ...Customizing External Siren For Face ID 2 & Face ID 3
Face ID 2 & Face ID 3 (FEM 800) from FingerTec now supports External Schedule Bell with a minimum of 5 seconds for trigger time. Read more for the latest Face ID firmware download link and steps to upgrade for the feature. The latest Face ID firmware ...Blast the External Siren Loudly with Face ID 4d
Introduction FingerTec’s Face ID 4d Terminal can be customized to support External Schedule which is useful in alerting employees to change shift or clocking status. However, take note that upon enabling this option, the Door Access feature of this ...External Buzzer or Siren Connections for Door Open Notification
Introduction For the safety or requirement of an industry, door always needs to be closed or else, it will risk intrusion, damage or loss of a product or an environment. For example, the storehouse storing valuable things, a server room where the ...