Installation Diagram for R2 (FEM565) - R2c with New AdapTec Plus

Installation Diagram for R2 (FEM565) - R2c with New AdapTec Plus

With the new release of our latest products, terminal installation might differ from our previous guide and diagram. Below is a full installation wiring diagram for R2 (FEM565) – R2c with the New AdapTec Plus.


If the R2c does not respond upon installation, please check the Dip Switch setting below:



Note: Do not adjust the dip switch. Make sure it is set to the default settings as shown in the image.

and also enable the R2c setting at the R2(565): Press Menu > Option > Access Option > 485 Reader Function > Y


For more information regarding R2c, click here to see its manual.
    • Related Articles

    • Installation for H2i - R2c with the New AdapTec Plus

      Effective immediately, H2i devices can now be paired with R2c readers. However, this is only possible through a customization request. When purchasing a brand new H2i terminal, remember to notify the sales person that the terminal is to be paired ...
    • Installation Guide of Face ID 4d (FMM) With AdapTec Plus

      Introduction FingerTec Face ID 4D is now supplied with a new version of the coreboard (FMM) that comes with new hardware parts and new exterior parts. To ensure the reader connects with secured wiring, we suggest using the AdapTec Plus connection. ...
    • Connecting the H2i with an AdapTec Plus

      With the recent release of our new product AdapTec Plus, many might wonder what is the role of AdapTec Plus in supporting the terminal. The AdapTec plus is a combination of a power supply with enhanced access control functionalities. It supports ...
    • AdapTec Plus and AdapTec-X, What’s Your Preference?

      Convenience VS High-Level Security AdapTec Plus and AdapTec X are designed to support two installation modes; one provides utmost convenience to users and another provides high-level security but slightly compromised in terms of user experience. ...
    • Option to Connect an AC240V Siren with a FingerTec Device

      The siren output signal from a FingerTec device is known as a dry contact and this basically means that the signal is not initially connected to a voltage source. It can also be referred to as a secondary set of contacts of a relay circuit, which ...