How to Change Wallpaper for FingerTec Devices via USB

How to Change Wallpaper for FingerTec Devices via USB

Introduction

Color multimedia FingerTec devices can display different wallpapers. By default, we have provided some wallpapers that you can choose from, however, users can also customize the wallpapers to suit their organization’s preferences. Below is the guide on how to change the wallpaper for FingerTec Devices via USB

A. Prepare wallpaper
In order to customize a new wallpaper, you will need to do the following:

1. USB drive must be format FAT 32

2. You need to create a folder named "wallpaper" in the root directory of the USB disk, and put the wallpaper pictures in this directory.

3. 20 pictures are supported and each picture cannot exceed 30 KB.

4. The picture name and format are not limited, with formats such as jpg, png and bmp

supported.

5. Please refer to table 1 for picture dimensions and supported devices.

No.

Model

Platform

Dimensions (pixels)

1

AC100C / TA100C

FMM 200

320 X 218

2

TA200 Plus / Q2i

FMM 200

320 X 218

3

FACE ID4 / FACE ID 4D

FMM220

240 X 295

4

FACE ID 2 / FACE ID X

FMM220 / FMM228

480 X 240

5

TA500

FLM 60

320 X 218

6

TC 10

ZMM 510

240 X 295

7

TC 20

ZAM 170 / ZAM 180

240 X 295

8

FACE ID 6

ZAM 180

480 X 740

Table 1

B.  Steps to upload the wallpaper to FingerTec devices  

1. Menu > USB Manager > Upload > Wallpaper

2. Upload selected picture or upload all pictures

 

 

3. Menu > Personalize > User Interface > Wallpaper

 


 Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.


 

 

 

 

 

 

 

 

 

 

 


    • Related Articles

    • TA300 USB Client Connection

      As you all might already know, the TA300 uses a USB cable instead of the traditional TCP/IP or RS232/485 cable. The type of USB cable used for communication is called the Standard-B plug. The Standard-B plug cable has a square shape with bevelled ...

    • Using a USB Flash Disk with Ingress

      In Ingress, the Advanced Access Control System, users can opt to use a USB flash disk to replace the need for a working Internet connection to connect to FingerTec terminals. This will enable the user to do the following: 1. Download user information ...

    • Smooth Troubleshooting Date/Time Change in FingerTec Terminals to Ensure Accurate Data Accumulation

      Introduction These tips are to assist users to determine the root cause of the time change issue on the terminals so that they will know how to tackle the situation effectively. Since it is related to the users’ attendance data, an inaccurate time ...

    • TCMS V3 – Using USB Flash Disk For Data Transfer

      INTRODUCTION FingerTec offers 3 ways of communication, which are TCP/IP, USB and Serial Port (RS485 or RS232). If a FingerTec terminal is installed remotely and away from any network (TCPIP), USB flash disk can be utilized to transfer users and ...

    • Doorbell Wiring for FingerTec Devices

      A doorbell is a small essential device that has become an integral part of our homes and business premises. It serves as a convenient and effective means of alerting occupants to the presence of visitors or deliveries at the front door. Gone are the ...