FingerTec’s TA100C and AC100C (FMM100) Devices Come With Data Backup Feature

FingerTec’s TA100C and AC100C (FMM100) Devices Come With Data Backup Feature

Introduction
With the new FMM100 core board comes a few useful new features in TA100C and AC100C. One of the features in FMM100 core board is to allow users to backup the device’s data and configuration in the device itself. This backed up data can be restored in the future or it can be copied to another device of the same model whenever needed.


           

This new feature eliminates the worry of data lost or corrupted after being transferred to the software. Take advantage of this feature to better use of the system.

There are two types of backup available in these models.

1.      Internal backup allows you to create backup to be saved inside the terminal itself.

2.      USB backup allows you to create backup and save it inside the USB to be downloaded on another location without deleting the data inside the terminal.

To back up data internally, follow these steps:
Menu > Data Management > Backup Data > Backup to Device > Start Backup

To restore the internal backup data, follow these steps:
Menu > Data Management > Restore Data > Restore from Device > Start Restore

To back up data into a USB flash disk, follow these steps:
Menu > Data Management > Backup Data > Backup to USB Disk > Start Backup

To restore the backup file from a USB flash disk, follow these steps:
Menu > Data Management > Restore Data > Restore from USB Disk > Start Restore

** NOTE: If you backed up the data into a USB flash disk, it is recommended that you restore the data immediately to determine the usability of the data. If the restoration fails, you need to repeat the backup process.

    • Related Articles

    • Upload User Photos into Fingertec Devices using FTUser Photo

      Introduction The latest version of TA100C and AC100C devices are equipped with the new Core Board version known as FMM 100, replacing the FEM510. The new coreboard is loaded with 800MHz microprocessor, 128MB RAM and 256MB flash memory. With the new ...

    • Upload Existing Users and Devices from Ingress to TimeTec TA

      Introduction FingerTec has recently released Ingress v3.2.2.20 which includes a new feature, Integrating TimeTec TA with Ingress. This new feature allows clients to upload their existing users and devices to their TimeTec TA account. Furthermore, it ...

    • FAQs - FingerTec BioBridge SDK

      Introduction FingerTec terminals come bundled with either the TCMSV2 or Ingress software for a Time Attendance system. Both software packages come as a complete system for all your time attendance and door access needs. However, for system developers ...

    • Connect Your FingerTec Terminals to FingerTec Cloud Center (FCC)

      Introduction FingerTec Cloud Center is the brand’s free data storage facility offered to all our customers as an added value service when buying FingerTec brand of biometric products. In the FingerTec Cloud Center or FCC, customers can save their ...

    • How to Change Wallpaper for FingerTec Devices via USB

      Introduction Color multimedia FingerTec devices can display different wallpapers. By default, we have provided some wallpapers that you can choose from, however, users can also customize the wallpapers to suit their organization’s preferences. Below ...