External Buzzer or Siren Connections for Door Open Notification
Introduction
For the safety or requirement of an industry, door always needs to be closed or else, it will risk intrusion, damage or loss of a product or an environment. For example, the storehouse storing valuable things, a server room where the temperature needs to be maintained, the dust-free rooms and etc. Hence, the clarity of knowing that the room is always need to be closed neatly is mandatory. By adding a buzzer or an alarm on the door, this purpose can be achieved.
Process
1- The buzzer or siren can be installed next to the person who is in charge for the room or space where maybe the person desk or office far from that.
2- A loud buzzer or siren can be used for large or noisy environment
Components
Wiring Diagrams
Below is the example of connection using the AdapTec Plus when using 12VDC buzzer/siren
Below is the example connection using the AdapTec Plus using 240VDC buzzer/siren
Installation Example
Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.
For the safety or requirement of an industry, door always needs to be closed or else, it will risk intrusion, damage or loss of a product or an environment. For example, the storehouse storing valuable things, a server room where the temperature needs to be maintained, the dust-free rooms and etc. Hence, the clarity of knowing that the room is always need to be closed neatly is mandatory. By adding a buzzer or an alarm on the door, this purpose can be achieved.
Process
1- The buzzer or siren can be installed next to the person who is in charge for the room or space where maybe the person desk or office far from that.
2- A loud buzzer or siren can be used for large or noisy environment
Components
Wiring Diagrams
Below is the example of connection using the AdapTec Plus when using 12VDC buzzer/siren
Below is the example connection using the AdapTec Plus using 240VDC buzzer/siren
Installation Example
Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.
Related Articles
Kadex External Siren
Introduction FingerTec’s Kadex terminal can be customised to support an external siren which is useful in alerting employees to make sure doors close properly after opening them to enter the premise or office. An external siren is also triggered when ...How to Install Two Face ID2 or Face IDX Door Access Devices with Door Force Open ID Verification Siren Clear
Introduction FingerTec Face ID2 and Face IDX are contactless biometrics face recognition door access devices. Typically, for those using fingerprint devices or card devices for exits, these devices are paired with slave units such as FingerTec R2c or ...How to Install Two Face ID2 or Face IDX Door Access Devices with Door Force Open ID Verification Siren Clear
Introduction FingerTec Face ID2 and Face IDX are contactless biometrics face recognition door access devices. Typically, for those using fingerprint devices or card devices for exits, these devices are paired with slave units such as FingerTec R2c or ...AdapTec Plus Siren or AdapTec X Siren Remote Control Door Switch for Mute and Exit Button
Introduction AdapTec Plus and AdapTec X has a siren function to pair with a master device to enhance the alarm sound signal from a master device. This siren will go off when a master device sends a signal such as a door open, a device broken, etc ...Activating the Door Closure Delay Siren in Ingressus
Introduction Security is an important aspect in every organization nowadays. Improper security measures may cause bigger problems such as robbery, data theft or even endanger the safety of a person. Even with the proper access control products ...