Disassembly Face ID 5/TD/FTD Parts

Disassembly Face ID 5/TD/FTD Parts

Introduction

Device assembly is a process in which all the internal components of the device system are fitted to make the device functional. The main component involves MCU Board, Camera Module, Infrared LED, Scanner Module, LCD Screen, LCD Touch Panel, etc. There is a proper process of attaching and installing every component. An installation technician should be competent to disassemble and reassemble the device. In this article, let’s dive into the step-by-step process of the Face ID 5 device and the disassembly of all the parts. 


Process of Disassembly Parts


Step 1:

  • Turn Off the power supply or power adapter that supplies power to the Face ID 5 device.

  • Dismantle the Face ID 5 device that is installed on the wall. 

  • Unplug all cables attached to the device.

Step 2:


Open all six screws from the back casing.

Step 3:


Open the back casing and be careful of the speaker connector


Step 4:


MCU Board Version 1.1

Take out all the connectors that are attached to the MCU board 

MCU Board Version 1.3

The LCD Panel and LCD Screen connector is located at the back of the MCU Board


Step 5:


  • Remove the sticker from the LCD Screen connector 

  • Take out the LCD Screen connector 

  • Unscrew MCU board 


Step 6:

Unscrew the camera module, IR LED Module, and Scanner Module.


Step 7:

  • You can now easily remove the LCD Screen, RFID Antenna and WIFI Antenna 



    • Related Articles

    • FACE ID 5 TD / FTD Wiring for Access Control

      Introduction Good news, FingerTec has launched Face ID 5 recently, and the two new models that are equipped with temperature readers are Face ID 5 TD and Face ID 5 FTD that also can be used for building access control. *Please state in your inquiries ...

    • Face ID 5 TD/FTD Turnstile Connection with External High-Temperature Alarm

      Introduction Turnstiles are access gates for controlling traffic, allowing one person a time to control traffic flow for in and out. Face ID 5 TD/FTD with a Temperature Sensor can detect and alert a person with a high body temperature. Adding an ...

    • Face ID 5 External Alarm Wiring Diagram

      Introduction The Face ID 5 series are equipped with an alarm function to notify the user of any restrictions on entry or security measures such as a door or device being forced open, high body temperatures (Face ID 5 TD /FTD), denying unknown access, ...

    • Troubleshoot Alarm Triggered From Face ID 5/TD/FTD

      Introduction An alarm is very important to notify a user if something is happening to the device or the access system. However, users sometimes do not know what causes the alarm to trigger. Here, we will show you how to troubleshoot what caused the ...

    • Installation Guide of Face ID 4d (FMM) With AdapTec Plus

      Introduction FingerTec Face ID 4D is now supplied with a new version of the coreboard (FMM) that comes with new hardware parts and new exterior parts. To ensure the reader connects with secured wiring, we suggest using the AdapTec Plus connection. ...