Changing the Keylock 7700 Position

Introduction

Here are some tips on how you change the position of your Keylock 7700  either from left to the right or right to the left).

Step 1:
Change the handle position for the front side.

 

Step 2:

Change the handle position for back side.

 

 

Step 3:
Change the latch position.

 

Step 4:

Switch the screw to the opposite position.

 

Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.

• Related Articles

• Keylock 7700 – Interchangeable Lock Tongue

  While designing FingerTec's Keylock 7700, we have taken into consideration not only the position of the lock (for left-handed or right-handed users) but also the installation of the door (either swing-in or swing-out method). FingerTec’s Keylock 7700 ...

• Keylock 7700 – Interchange of Double and Single Latch

  When interchanging Keylock 7700 between double and single latches, these are the items that you must first have: Models Keylock 7700 D (double latch) Keylock 7700 S (single latch) Latch front panel Not applicable Door frame panel Keyhole blocker The ...

• Changing Employee ID in TCMS V2 and FingerTec devices

  Introduction There are cases where you need to change the IDs of your employees. For example, an employee that changes department, an employee who is transferred to other branch or an employee who gets promoted. TCMS V2 allows you to change the ...

• Changing Time Display Format in Ingress & TCMS V3

  Introduction One of the options involve choosing between hh:mm or hh:hh. The hh:mm format displays the minute according to the amount of minutes that have passed, while the hh:hh time format displays the minute in relation to the hours that have ...

• Changing Device’s Display Theme and Advertisement Picture through Ingress & TCMS V3

  Introduction In both Ingress (since v3.0.5) and TCMSV3 software, there is currently a feature known as Multimedia Management. This feature allows you to change the Device’s Display Theme and Advertisement Picture remotely from the software, without ...